LPC MicrocontrollersのトピックRe: ask for LPCXpresso43S67 win10/11 USB driver package

ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Fri, 09 Jun 2023 09:40:12 GMT

1、ask for LPCXpresso43S67 win10/11 USB driver package as it is difficult to connect the www.lpcware.com

2、Can LPCXpresso43S67 work with WIN11 system?

Re: ask for LPCXpresso43S67 win10/11 USB driver package

Alice_Yang — Fri, 09 Jun 2023 11:13:24 GMT

Hello @ZJane

I haven't tested with Win11, what about the issue on your side? Please take a screenshot show it.

Please check Device Manger on your PC, whether can recognized the debugger?

How about update debugger firmware on your board?

Alice

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Fri, 09 Jun 2023 21:18:07 GMT

I didn't see LPC in device manager after install the driver, and it cannot be recognized in the debugger which showed no probes.
What should we do to solve it？
What does "update debugger firmware on your board" mean？

Re: ask for LPCXpresso43S67 win10/11 USB driver package

Alice_Yang — Mon, 12 Jun 2023 02:33:25 GMT

Hello @ZJane

Please refer to USER GUIDE:

https://www.nxp.com.cn/docs/en/user-guide/UM10946-om13084_88.pdf

Alice

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Tue, 13 Jun 2023 10:46:13 GMT

I tried LPCScrypt, the device cannot be found.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

Alice_Yang — Wed, 14 Jun 2023 02:58:59 GMT

Hello @ZJane

Make sure your board make DFU link as description, it also mean short 1-2 of JP6 on LPCXpresso4337 board.

Alice

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Wed, 14 Jun 2023 10:41:37 GMT

yes, the board make DFU link and connec a micro USB cable to connector J5.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Wed, 14 Jun 2023 12:23:39 GMT

You can see the error and board connection in the picture below.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

frank_m — Wed, 14 Jun 2023 12:39:50 GMT

If you plug it into the host PC, you should see something in the Device Manager.
Does it report any errors ? Are all necessary driver installed / up to date ?

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Wed, 14 Jun 2023 13:07:38 GMT

I find nothing new in the Device manager, and it report 0 errors.
I have installed the lpc_driver_setup.exe download from NXP website. Any other drivers need to be installed?
I tried these steps in win10/win11, it doesn't work on both system.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

frank_m — Wed, 14 Jun 2023 13:54:19 GMT

You are not by chance using VMs, and forgot to connect USB device(s) forth and back between host and VM ?

Here an example of a connected STM eval board, with the integrated debugger reflashed to a Segger J-Link:

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Wed, 14 Jun 2023 14:13:12 GMT

not VMs, I try to configure the board on two computers(one pc with win10 and another with win11) and encounter the same problem.
maybe other drivers should be installed?

Re: ask for LPCXpresso43S67 win10/11 USB driver package

frank_m — Wed, 14 Jun 2023 14:24:52 GMT

I only occasionally use an LPC board on a Windows10 PC (LPCxpresso54628 board).
LPC-Link driver installation was part of the LPCXpresso IDE installation, and worked mostly fine for me.
I have no experience with Win11.

I hope the NXP staff can help you in this regard.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

ZJane — Wed, 14 Jun 2023 14:31:39 GMT

Thanks all the same.

Re: ask for LPCXpresso43S67 win10/11 USB driver package

Alice_Yang — Thu, 15 Jun 2023 02:27:49 GMT

Hello @ZJane

If can not enter DFU mode, maybe debugger on board broken.

You can try to use external debugger to test.

Alice