LPC MicrocontrollersのトピックLinux CLI tools for MCU-Link Pro

Linux CLI tools for MCU-Link Pro

chad_k — Fri, 14 Apr 2023 16:02:51 GMT

I'm considering using the MCU-Link Pro running from an ARM-based Linux computer (probably a Raspberry Pi 4) as a programming setup for production with the LPC5528. Does anyone know what CLI tools are available? The documentation online is a little sparse. Am I trying to do this the hard way? Is there a better way? Thanks for your help!

Re: Linux CLI tools for MCU-Link Pro

Alice_Yang — Mon, 17 Apr 2023 10:21:01 GMT

Hello @chad_k

Sorry I can not provide Linux CLI tools, about the use of MCU-Link Pro, you can refer to user manual:

https://www.nxp.com.cn/docs/en/user-manual/UM11673.pdf

Alice

Re: Linux CLI tools for MCU-Link Pro

ErichStyger — Mon, 15 May 2023 07:08:11 GMT

NXP has released a CLI tool for the LinkServer (e.g. supporting the MCU-Link debug probes), see

https://mcuoneclipse.com/2023/05/14/linkserver-for-microcontrollers/

I hope this helps,

Erich

Re: Linux CLI tools for MCU-Link Pro

chad_k — Thu, 18 May 2023 13:51:26 GMT

Erich,

That looks great. Thank you for your work on this. Is there any way to get an installer for Raspbian or the source packages to build it for an ARM-based system?

Re: Linux CLI tools for MCU-Link Pro

ErichStyger — Thu, 18 May 2023 14:49:03 GMT

There is no ARM based package to my knowledge, and it is not available in source form.

But you can run the arm-none-eabi-gdb on the Raspy and then connect to its TCP port (3333 by default).