topic Re: reg:link server issue in LPC Microcontrollers

reg:link server issue

faziya — Wed, 05 Apr 2023 07:11:46 GMT

I am working on SDK 2.5.0 now i am updated the SDK to 2.13 I am uanable to detect the link server probe

getting stuck while debugging ,the user operation is waiting.if any one know how to recover can u please reply me as early as possible

ZhangJennie — Wed, 05 Apr 2023 08:39:42 GMT

Hi faziya,

Please make sure you are using the latest version of MCUXpresso IDE v11.7.1 as well.

You can download it from this link

If problem still exists, let me know your chip part number and if you can reproduce the issue with a demo board.

Thanks,

Jun Zhang

faziya — Wed, 05 Apr 2023 09:23:20 GMT

I am using IDE version 11.7.0 ,same issue is repeated,while debugging link server probe is not detected

if i click debug i get stucked user operation is waiting.Suggest a way to reboot the boot.

chip no - LPC54S018JET180

If any one know the solution please reply me as early as possible

Thank You

ZhangJennie — Thu, 06 Apr 2023 12:18:24 GMT

Do you use nxp demo board or own PCB?

if custom PCB, did you ever connect it once before?

please test it with create a NEW project under a NEW workspace to avoid old associations.

Thanks,

Jun Zhang

faziya — Wed, 12 Apr 2023 09:39:05 GMT

With demo project i am not getting the error, in the working project i am getting the error

i am using lpcxpresso54s018-evk board

ZhangJennie — Sat, 15 Apr 2023 12:23:24 GMT

Please check which Flash driver configuration file (*.cfg) is used in your project.

change Flash Driver to SPIFI_GENERIC, see how it works.

If this can't resolve your problem, send your demo project here, I will check it directly on my side.

Thanks,

Jun Zhang