LPC MicrocontrollersのトピックRe: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Fri, 27 Jan 2023 13:19:04 GMT

Using USB communication How to interface usb driver with lpc 54018 controller ?

Please send the following steps ....

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

ZhangJennie — Wed, 01 Feb 2023 07:10:19 GMT

Do you use USB1 or USB0?

There are some USB demo codes under MCUXpresso SDK folder. By default, the demo code is for USB0 (FS USB). If you use USB1, please follow below article to switch to USB1 code:

https://community.nxp.com/t5/LPC-Microcontrollers-Knowledge/LPC-ALL-Summary-of-Switching-USB-demo-from-USB0-to-USB1/ta-p/1428522

For HW design, I suggest you refer EVK schematic:

https://www.nxp.com/downloads/en/schematics/LPCXpresso546xx-540xx.zip

Have a nice day,

Jun Zhang

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Thu, 02 Feb 2023 12:05:56 GMT

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Thu, 02 Feb 2023 12:10:53 GMT

@ZhangJennie thanks for your reply.

i am using USB1

there is no read and write function in mcuxpresso demo code .only initialization functions are there.

kindly help me to read and write in pendrive through usb communication in lpc54018.

have a nice day.

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Mon, 27 Feb 2023 04:59:52 GMT

@ZhangJennie thanks for your reply.

USB HOST demo under SDK example code ("host_msd_fatfs_bm") I have download but its not working !

I want to read and write in pen drive through USB communication iam using USB1.

kindly help me @ZhangJennie

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

ZhangJennie — Mon, 27 Feb 2023 07:32:11 GMT

Please follow attched files to test the demo.

How it works if you plug in a U-disk device to the board? If problem, which step you have problem?

Thanks,

Jun Zhang

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Mon, 27 Feb 2023 13:51:10 GMT

@ZhangJennie

in debug mode

it prints only " host init done "

when I plug in u disk in USB1 nothing is printed in terminal.

please reply @ZhangJennie

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

ZhangJennie — Tue, 28 Feb 2023 07:15:25 GMT

I tested host_msd_fatfs_bm demo with LPC55s69 demo board, it ran well.

While on LPC54018 board, I got the same as yours. I am checking the reason. Will let you know as soon as I find it out.

Thanks,

Jun Zhang

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Tue, 28 Feb 2023 09:28:47 GMT

@ZhangJennie iam waiting for your reply..

thank you.

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

ZhangJennie — Tue, 07 Mar 2023 08:01:20 GMT

HI Arularasan

I tested host_msd_fatfs for both USB0 and USB1. They both work well.

Please check the jumper setting.

For USB0 (USB FS), board jumper settings are as below

J9 2-3 full speed mode; J10 shunt full speed; J11 2-3, J12 2-3, J13 2-3 , need provide external power through J1.

For USB1 (USB HS), board jumper settings are as below

J9 1-2 high speed mode; J10 open high speed; J11 2-3, J12 2-3, J13 2-3 , need provide external power through J1.

As the default code is for FS USB. To work with HS USB, revise source\usb_host_config.h macro as below :

#define USB_HOST_CONFIG_OHCI (0U)

#define USB_HOST_CONFIG_IP3516HS (1U)

Jun Zhang

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

Arularasan — Fri, 10 Mar 2023 05:27:19 GMT

@ZhangJennie thanks for your support.

After modify demo code macro definition in usb_host_config.h and jumpers to USB1 its working

thank you...

Re: USB DRIVER interface with LPC 54018 MICRO CONTROLLER

ZhangJennie — Fri, 10 Mar 2023 09:41:27 GMT

You are welcome.