topic LPC55 PLU tool in LPC Microcontrollers

LPC55 PLU tool

_Ferrari_ — Thu, 26 Jan 2023 10:37:47 GMT

Dear all,

I'm developing a project using LPC55xx processor and I have to use the PLU feature of the processor.

I'm using MCUXpresso IDE v11.6.1 [Build 8255] [2022-10-03] to develope the project and I selected the Peripherals configuration to configure PLU.

I selected the PLU tabs and I copy the link (https://www.nxp.com/mcu-plu-config-tool) suggested by MCUXpresso to download the proper tool.

Unfortunately the requested page (https://www.nxp.com/mcu-plu-config-tool) is not found in your site.

Did you have similar problem ?

How did you fix it ?

Thank you for your help and cooperation

best regards

RaRo — Fri, 27 Jan 2023 20:12:49 GMT

Please follow the next steps to access the PLU Configuration Tool in MCUXpresso IDE:

Download MCUXpresso IDE v11.7.0, this is because PLU Tool in MCUXpresso IDE v11.6.1 is not working properly.
Download the LPC55xx appropriate SDKv2.13.
Create a new project or import an SDK example.
Open ConfigTools -> Peripherals.
Then, in Components section, go to Register initialization.

Click on the Open Schematic View.

Best regards, Raul.