LPC MicrocontrollersのトピックCan I write a URL into OM4002 NDEF so it does not need the app when not using a battery?

Can I write a URL into OM4002 NDEF so it does not need the app when not using a battery?

DannyGembom — Wed, 25 Jan 2023 12:05:02 GMT

In all the samples for reading the NDEF message on LCP8N04, I need to open the Android or iPhone app.

I want that URL will be launched for users who not install any app. Like NTAG 215 and others.

My questions. When I put an NTAG close to the iPhone, it works without opening any app if the NTAG contains a link.

Can I put a link URL on the OM40002 board so it will be opened automatically for users who do not install any app?

If it is not possible. Why?

I'm using it without a battery. Using the energy harvesting

Re: Can I write a URL into OM4002 NDEF so it does not need the app when not using a battery?

KaiLi — Thu, 02 Feb 2023 05:01:58 GMT

Hello @DannyGembom

Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.

LPC8N04 Compatible with NFC Forum Type 2, So your application scenario can be achieved by LPC8N04. NXP has developed a mobile app for it, through which you can debug your device. The below link video could help you and please refer to it.

https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc800-arm-cortex-m0-plus-/low-cost-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:LPC8N04

Best regards,

Kelly

Technical Support

NXP Semiconductor