topic Flash driver operation gave error in LPC Microcontrollers

Flash driver operation gave error

Sunil2 — Mon, 16 Jan 2023 09:47:47 GMT

Dear sir,

We have purchased 5 board LPC54S018-EVK and testing be carried out UART communication, The flowing result observed. Looking for suggestion for problem resolution.

1.Unable to perform operation! Command failed with exit code 1

Re: Flash driver operation gave error

Miguel04 — Mon, 16 Jan 2023 18:50:34 GMT

Hi @Sunil2

Could you provide more information, please?

Are you using an SDK example?

With what are you trying to communicate the LPC?

I'll be waiting for your response.

Best Regards, Miguel.

Re: Flash driver operation gave error

Sunil2 — Tue, 17 Jan 2023 03:26:19 GMT

Hi @Miguel04 ,

Thank you for your replay.

Yes we are using SDK example, example name: usart_dma_rb_transfer.c , not for this example I tried other example also but same problem.

LPC name:54S018JET180

Re: Flash driver operation gave error

Miguel04 — Tue, 17 Jan 2023 17:25:50 GMT

Hi @Sunil2

Could you help me looking into this link, please? This is a Getting Started guide for the LPC54S018.

Let me know if this help you.

Best Regards, Miguel.

Re: Flash driver operation gave error

Sunil2 — Fri, 20 Jan 2023 09:23:40 GMT

Hi @Miguel04

Thank you for your feedback.

We are try to buy 2 more 54S018 EVK with RK043FN02H-CT, But that type of EVK and display both are not available right now, So Please suggest alternate part number of RK043FN02H-CT display.

Re: Flash driver operation gave error

Miguel04 — Fri, 20 Jan 2023 17:05:06 GMT

Hi @Sunil2

Look at the RK043FN66HS-CTG, this could be a alternative. Let me know if you have another question.

Best Regards, Miguel.