topic Re: Debug LPC1754 board in LPC Microcontrollers

Debug LPC1754 board

YANHAI — Sun, 30 Oct 2022 02:58:03 GMT

I want debug LPC1754 using LPC-LINK2, However, It seems that LPC-LINK2 could not be purchased now.

I want know what new Dev board I can use?

I'm new in this field, Thanks in advance!

Re: Debug LPC1754 board

ZhangJennie — Mon, 31 Oct 2022 02:57:31 GMT

Hi @YANHAI

LPC-Link2 is no longer recommended. Please use MCU-Link. It supports LPC17xx

https://www.nxp.com/design/microcontrollers-developer-resources/mcu-link-debug-probe:MCU-LINK

Thanks,

Jun Zhang

Re: Debug LPC1754 board

YANHAI — Mon, 31 Oct 2022 03:18:16 GMT

Dear Jun Zhang

Thanks very much!

But when I check the Supported Devices page, LPC17xx is not listed.

So, I don't know if I can use it or not, is it no problem to use?

Thanks again!

Yanhai

Re: Debug LPC1754 board

ErichStyger — Mon, 31 Oct 2022 05:49:10 GMT

I don't have that LPC1754, but it is listed as supported device in MCUXpresso IDE:

So I assume you can use the MCU-Link for it, as it is supported inside the IDE.

And if you are checking out debug probes: be sure to have a look at the Pro version too:

https://mcuoneclipse.com/2021/10/17/new-mcu-link-pro-debug-probe-with-energy-measurement/

It was for some time out of stock, but should be available again now.

I hope this helps,

Erich

Re: Debug LPC1754 board

ZhangJennie — Mon, 31 Oct 2022 07:07:19 GMT

I don't have LPC1754 but I ever used MCU-Link debugging LPC1769. it works well.

I believe MCU-Link work for LPC1754 as well.

Re: Debug LPC1754 board

YANHAI — Mon, 31 Oct 2022 07:24:54 GMT

Thanks Zhang Jennie, Ok, I will purchase a MCU-LINK and have a try then.

Re: Debug LPC1754 board

YANHAI — Mon, 31 Oct 2022 07:27:12 GMT

Thanks EricStyger!

Re: Debug LPC1754 board

ZhangJennie — Tue, 01 Nov 2022 06:00:39 GMT

welcome!

Re: Debug LPC1754 board

YANHAI — Wed, 16 Nov 2022 09:55:57 GMT

Just let you know; it works perfect using MCU-Link to debug LPC1754.

Thanks very much!

Re: Debug LPC1754 board

ZhangJennie — Wed, 16 Nov 2022 11:54:15 GMT

Good to know. Thanks.