LPC MicrocontrollersのトピックRe: question

question

milan021 — Fri, 03 Jun 2022 12:38:22 GMT

Hello,

I have a problem with your developing system LPC55S16. When I put your example of code with printf "Hello world", and after building and debugging successfully, nothing is written on console, and I have a situation like on photos which I send you as well.

Do I need to change the configuration of pins for example, or something else ?

One more thing, when run simulation, LED diode D8 starts to work.

Best regards

Re: question

DanielRuvalcaba — Mon, 06 Jun 2022 17:43:41 GMT

Hi,

By default, the SDK examples uses UART to send information to a terminal.

Please, open a terminal with a 115200 baud rate.

You can use any terminal you want, but if you want to open a Terminal in MCUXpresso please go to Window -> Show View -> Other and select Terminal.

Then, click on Open a Terminal.

Configure the terminal.

And you should now be able to see the message.

I hope this helps, Daniel.