LPC MicrocontrollersのトピックLPCXpresso no matching for cortex_m0

LPCXpresso no matching for cortex_m0

Pel — Fri, 05 Nov 2021 16:06:54 GMT

Hello NXP Community,

I am trying to run some example projects on the NHS3152 NFC Tag, but the following error keep preventing me from uploading a built project onto my board:

When I proceed (clicking OK) I have the choice of the debugger I want to use :

Both of them have the same error:

I can't seems to find the source of the problem, any help is welcome.

P.S. I have the com.nxp.nhs3xxx.update-7.9.2-SNAPSHOT-159.zip plugin installed

Regards.

Re: LPCXpresso no matching for cortex_m0

converse — Fri, 05 Nov 2021 19:33:32 GMT

Which debug probe are you using?

Re: LPCXpresso no matching for cortex_m0

xiangjun_rong — Mon, 08 Nov 2021 02:57:12 GMT

Hi,Alexandre,

Maybe this ticket can help you, pls refer to it.

https://community.nxp.com/t5/Sensors/Arduino-as-ISP-Flash-Magic-don-t-work-on-NHS3152/m-p/808336

XiangJun Rong

Re: LPCXpresso no matching for cortex_m0

Pel — Mon, 08 Nov 2021 14:57:59 GMT

Hi,

I'm using the LPC-Link 2. (With the connection LPC-Link 2 J7 -to- NHS3135 demotkit J2).

Re: LPCXpresso no matching for cortex_m0

Pel — Mon, 08 Nov 2021 15:19:39 GMT

Hello XiangJun,

Thank you for the recommendation. Unfortunately, it wasn't my problem. I had shorted the jumper 2 of my LPC-Link 2. Plus, I just measured 3.3V between my VDD and GND when my NHS3152 TAG is connected to the LPC-Link trough the J2 connector, so the chip seems to have power when I debug.

Any other Idea ?

Regards.

Alexandre.

Re: LPCXpresso no matching for cortex_m0

xiangjun_rong — Tue, 09 Nov 2021 06:56:20 GMT

Hi, Alexandre,

I have not the schematics of the NHS3152 demo kit, I attach the page of LPC-Link 2 schematics, you have to connect the J7(10 pins) or J8(20 pins) of LPC-link 2 to the SWD connector of NHS3152 demo board. If you close JP2, the NHS3152 demo kit will get power from LPC-LINK 2 board.

I suppose that the JP1 should be closed for LPC-link 2 board, pls have a try.

XiangJun Rong

Re: LPCXpresso no matching for cortex_m0

Pel — Tue, 09 Nov 2021 16:59:15 GMT

Hi XiangJun,

Thank you for your time. I tried debugging with JP1 shorted like you suggested. For the C/C++ Application Debug I have the same result. But, when I use the C/C++ (NXP Semiconductors MCU Application Debug I have a new error:

I thinking that maybe my board has some functions disable, but don't know how to make sure.

Regards.

Re: LPCXpresso no matching for cortex_m0

xiangjun_rong — Wed, 10 Nov 2021 03:10:07 GMT

Hi,

I think that the LPC-Link 2 device configuration is okay. It appears that the Cortex-M0 of NHS31xx has response.

Pls refer to the ticket:

https://community.nxp.com/t5/LPC-Microcontrollers/NHS3152-Program-will-only-run-while-connected-to-LPC-link-2-amp/m-p/1186076

XiangJun Rong

Re: LPCXpresso no matching for cortex_m0

Pel — Wed, 10 Nov 2021 16:04:21 GMT

Hello,

After reading and researching a bit I managed to flash the NHS3152 chip on my board and the code seems to work fine (I uploaded demo_blinky and now the LED blink). But when I try to debug the demo_blinky project I still have the same errors as before.

Is this a normal behavior ? I can flash the code on the chip, but can't debug it.

Regards.

Re: LPCXpresso no matching for cortex_m0

xiangjun_rong — Thu, 11 Nov 2021 03:25:11 GMT

Hi, Pel,

Unfortunately, I have not idea why you can not debug but can download code to flash. Does the LPCXpresso supports NHS3152?

XiangJun Rong

Re: LPCXpresso no matching for cortex_m0

Pel — Thu, 11 Nov 2021 14:48:13 GMT

Hello,

Everything seems to indicate that the NHS3152 is supported by the IDE.

Here is two examples:

MCU settings

Creating a new project

Regards.

Re: LPCXpresso no matching for cortex_m0

dani22222 — Sun, 06 Feb 2022 15:14:23 GMT

Did you manage to fix the issue?

I'm having same problem