LPC Microcontrollers中的主题 LCPXpresso Program not found

LCPXpresso Program not found

Chish — Thu, 07 Oct 2021 07:05:05 GMT

I've just started learning the programming in NXP.

I'm using LPC11148 with LPC link debugger but I'm getting the following error.

'launching DALI_Slave_LPC111x Debug' has encountered a problem.
Program file doesn't exist

What could be the problem and how can I fix it up?

Regards,

Re: LCPXpresso Program not found

ZhangJennie — Fri, 08 Oct 2021 12:43:40 GMT

Please check if your project generate valid program file (*.afx) file.

To verify if HW connect is correct, create a new project with wizard, can it be downloaded to target ?

Thanks,

Jun Zhang

Re: LCPXpresso Program not found

Chish — Fri, 08 Oct 2021 14:36:29 GMT

I tried to build new project

I selected LPC11148/302

then there appear blank project with the existing " program"

I built it and then debug

after that this dialog appeared

PS: I'm using LPC link.

IDE LPCXpresso free edition

Re: LCPXpresso Program not found

ZhangJennie — Sat, 09 Oct 2021 08:52:55 GMT

Hi,

If none of the project can be downloaded, the problem may be on both PC side or Board side.

Please test your board on two more computers to verify if the board is good?

If your board never successfully connected once and this is a custom designed board, you need to check the debug interface design. and make sure the LPC-Link is well recognized by windows.

https://community.nxp.com/t5/LPCXpresso-IDE-FAQs/Design-Considerations-for-Debug/m-p/469565

Have a nice day

Jun Zhang

Re: LCPXpresso Program not found

Chish — Mon, 11 Oct 2021 09:42:58 GMT

Hi, I've changed the name and remove the ".hex" from the post-building settings the issue is resloved when I debug with the MCUXpress. After doing all the same settings for the LPCXpress it doesn't work... although the code is same.

Regards,

Re: LCPXpresso Program not found

Chish — Mon, 11 Oct 2021 12:11:01 GMT

14:08:40 **** Incremental Build of configuration Debug for project DALI_Slave_LPC111x ****
make -r all
Building file: ../src/Discovery.c
Invoking: MCU C Compiler
arm-none-eabi-gcc -D__REDLIB__ -O0 -g3 -Wall -c -fmessage-length=0 -mcpu=arm7tdmi -D__REDLIB__ -specs=redlib.specs -MMD -MP -MF"src/Discovery.d" -MT"src/Discovery.o" -MT"src/Discovery.d" -o "src/Discovery.o" "../src/Discovery.c"
../src/Discovery.c:8:21: fatal error: LPC11xx.h: No such file or directory
compilation terminated.
make: *** [src/Discovery.o] Error 1

14:08:40 Build Finished (took 331ms)

Now I'm getting this error

Re: LCPXpresso Program not found

ZhangJennie — Tue, 12 Oct 2021 03:37:44 GMT

From the error message "fatal error: LPC11xx.h: No such file or directory", your project can't find LPC11xx.h . Do you include this file to the project?

or is this code based on lpcopen? if so, you need to build chip and board lib first.

Again, if this is a demo code, please send the download link, thus we can check it directly.

Thanks,

Jun Zhang