Not able to select BSP for LPC54628 in Appwizard

Sajil — Thu, 02 Sep 2021 17:58:33 GMT

I am attempting to build a GUI application on LPC54628 board. While creating the project, BSP selection is required in which I have no option coming up for the board. The GUI can be built but the code cannot be generated for integration with MCUexpresso.

I am following the links mentioned below:

@https://www.nxp.com/design/training/mcu-tech-minutes-gui-development-with-emwin-and-appwizard:TIP-MCU-TECH-MINUTE-GS-EMWIN-1

@https://www.nxp.com/design/software/embedded-software/nxp-emwin-libraries:EMWIN-GRAPHICS-LIBRARY

I have made sure the emwin is ticked in the SDK builder for MCUexpesso and have repeated the process multiple times but in vain.I have attached the screenshot for reference.BSP selection is empty

Please help me with this issue, Thanks.

Re: Not able to select BSP for LPC54628 in Appwizard

Alice_Yang — Tue, 07 Sep 2021 02:34:33 GMT

Hello Sajil,

I was able to confirm the same result, and report it to SE team, they help to confirm whether it will be updated on our end with the latest version.

Now on Segger's website for their trial versions, The 1.22 and 1.24 have the BSP information intergrated again. I recommend that if you needs it right away they can begin to develop your application using the trial version from Segger's website. Or create custom BSP refer to AppWizard-> 12.2 Creating custom BSPs .

Alice

LPC Microcontrollers中的主题 Re: Not able to select BSP for LPC54628 in Appwizard

Not able to select BSP for LPC54628 in Appwizard

Re: Not able to select BSP for LPC54628 in Appwizard