topic Re: schematic and footprint for LPC55S14BD64E in LPC Microcontrollers

schematic and footprint for LPC55S14BD64E

Nadia — Thu, 10 Jun 2021 09:21:52 GMT

Good morning, could you tell me where I can find the schematic and the footprint of the MCU 55S14BD64E for Altium?

Thank you very much.

Re: schematic and footprint for LPC55S14BD64E

Omar_Anguiano — Mon, 14 Jun 2021 18:56:53 GMT

Hello

Hope you are well.
On this page, you can find the footprints for the available parts. If the symbol is not available you can request a new one: https://www.nxp.com/design/software/models/microcontroller-symbols-footprints-and-models:MCUCAD#

If you have more questions do not hesitate to ask me.
Best regards,
Omar

Re: schematic and footprint for LPC55S14BD64E

Nadia — Tue, 15 Jun 2021 11:47:21 GMT

@Omar_Anguiano The symbol is not available, what can I do?
I need the symbol and the print of LPC55S14JBD64E

Re: schematic and footprint for LPC55S14BD64E

Omar_Anguiano — Mon, 21 Jun 2021 20:06:09 GMT

You can find them at the product page under the tab "Tools & Software" https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc551x-s1x-baseline-arm-cortex-m33-based-microcontroller-family:LPC551X-S1X?tab=Design_Tools_Tab

If you have more questions do not hesitate to ask me.
Best regards,
Omar

Re: schematic and footprint for LPC55S14BD64E

Nadia — Tue, 22 Jun 2021 07:35:23 GMT

Hi @Omar_Anguiano

I am having problems with the MCU programming.

I go into programming the microcontroller once, and I advance two lines in the code, and I get the message of: Break at address "0xeffffffffe" with no debug information available, or outside of program code... I stop it, try to program again, and it doesn't give me any option, and the same message appears all the time.

What could it be?