<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>LPC MicrocontrollersのトピックUSB NFC Dongle with NXP PN7150 by Mikroe</title>
    <link>https://community.nxp.com/t5/LPC-Microcontrollers/USB-NFC-Dongle-with-NXP-PN7150-by-Mikroe/m-p/1287331#M45288</link>
    <description>&lt;P&gt;Hello support,&lt;/P&gt;&lt;P&gt;I am dealing with the issue of communication error withing usb hid bridge between application and fw.&lt;/P&gt;&lt;P&gt;By using your windows application with original fw loaded onto dongle, I am facing an issue with USB stack I believe.&lt;/P&gt;&lt;P&gt;As a result, the fw needs to restart since it gets stuck, while from application side, it fails to connect.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;How to reproduce the issue:&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Open the application and try reading something. Close the application and wait for ~15 seconds. Open the application again. Read a tag and again close the application. Again, wait for ~15 seconds, and LPC will be stuck. Run the application again and it will not be able to communicate (failed 2 retries during NCI connect). From this point onward, it will never work until the FW is reset.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;Best regards,&lt;/P&gt;&lt;P&gt;Stevie&lt;/P&gt;</description>
    <pubDate>Fri, 04 Jun 2021 07:16:38 GMT</pubDate>
    <dc:creator>Stevie91</dc:creator>
    <dc:date>2021-06-04T07:16:38Z</dc:date>
    <item>
      <title>USB NFC Dongle with NXP PN7150 by Mikroe</title>
      <link>https://community.nxp.com/t5/LPC-Microcontrollers/USB-NFC-Dongle-with-NXP-PN7150-by-Mikroe/m-p/1287331#M45288</link>
      <description>&lt;P&gt;Hello support,&lt;/P&gt;&lt;P&gt;I am dealing with the issue of communication error withing usb hid bridge between application and fw.&lt;/P&gt;&lt;P&gt;By using your windows application with original fw loaded onto dongle, I am facing an issue with USB stack I believe.&lt;/P&gt;&lt;P&gt;As a result, the fw needs to restart since it gets stuck, while from application side, it fails to connect.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;How to reproduce the issue:&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Open the application and try reading something. Close the application and wait for ~15 seconds. Open the application again. Read a tag and again close the application. Again, wait for ~15 seconds, and LPC will be stuck. Run the application again and it will not be able to communicate (failed 2 retries during NCI connect). From this point onward, it will never work until the FW is reset.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;Best regards,&lt;/P&gt;&lt;P&gt;Stevie&lt;/P&gt;</description>
      <pubDate>Fri, 04 Jun 2021 07:16:38 GMT</pubDate>
      <guid>https://community.nxp.com/t5/LPC-Microcontrollers/USB-NFC-Dongle-with-NXP-PN7150-by-Mikroe/m-p/1287331#M45288</guid>
      <dc:creator>Stevie91</dc:creator>
      <dc:date>2021-06-04T07:16:38Z</dc:date>
    </item>
  </channel>
</rss>

