LPC MicrocontrollersのトピックPN5180 and LPC-Link2 programming

PN5180 and LPC-Link2 programming

Thomas_jjzhou — Fri, 07 May 2021 05:27:38 GMT

Dear Sir,

As I starts to evaluate the PN5180 board, and connected with LPC-Link2. But not sucessfullly.

The console window shows:

I ran the NfcrdlibEx1_DiscoveryLoop code, but not show the card detected information .How to solve it? Thanks

Re: PN5180 and LPC-Link2 programming

fangfang — Tue, 11 May 2021 02:04:02 GMT

Hello,

Did you use MCU LINK test it? And has the similar issue?

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

Re: PN5180 and LPC-Link2 programming

Thomas_jjzhou — Fri, 14 May 2021 07:30:24 GMT

Yes, I connected the LPC-Link2 through cable.