LPC MicrocontrollersのトピックRe: Running the NXP-NCI project. Error: cannot connect to NXPNCI device

Running the NXP-NCI project. Error: cannot connect to NXPNCI device

Gas — Thu, 11 Mar 2021 14:56:45 GMT

Hi All,

I worked fine in a project based on NXP-NCI_LPC55xx_example, but now in the debug session I see always :"Running the NXP-NCI project. Error: cannot connect to NXPNCI device".

I plugged OM5578/pn7150 Board.

Any help?

Thanks

Re: Running the NXP-NCI project. Error: cannot connect to NXPNCI device

victorjimenez — Wed, 24 Mar 2021 23:19:41 GMT

Hello,

I apologize for the late response. Did you modify the example? If so, which changes did you make? I made some tests on my end with the example as it is and I didn't face any problems.

Regards,
Victor

Re: Running the NXP-NCI project. Error: cannot connect to NXPNCI device

Gas — Thu, 25 Mar 2021 06:52:03 GMT

Hi victojimenez,

due to backup and copy, the Ven and Irq pins was missed. I don't know the reasons. In every case I'd solved.

Regards

Re: Running the NXP-NCI project. Error: cannot connect to NXPNCI device

victorjimenez — Thu, 25 Mar 2021 17:38:06 GMT

Thanks for sharing your findings! I'm glad to hear that you were able to solve the problem.

Regards,
Victor