topic CAN Protocol related Queries.. in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/CAN-Protocol-related-Queries/m-p/521679#M4317 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by kuldip rajput on Wed Jul 08 22:55:35 MST 2015</STRONG><BR /><SPAN>Hello everyone,</SPAN><BR /><BR /><SPAN> I need to know the following related issues for CAN protocol.</SPAN><BR /><SPAN> 1) cdo we use the ID 0 in the CAN message transfer?</SPAN><BR /><SPAN> 2) In most of the cases in the CAN network how the collision resolution happens. without arbitration is it possible to resolve the collision? </SPAN><BR /><SPAN> 3) Most of the cases because of REC (Receive error cout) the node not goes to the BUS OFF states, May i know the reason, </SPAN><BR /><BR /><BR /></BODY></HTML> Wed, 15 Jun 2016 16:36:06 GMT lpcware 2016-06-15T16:36:06Z CAN Protocol related Queries.. https://community.nxp.com/t5/LPC-Microcontrollers/CAN-Protocol-related-Queries/m-p/521679#M4317 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by kuldip rajput on Wed Jul 08 22:55:35 MST 2015</STRONG><BR /><SPAN>Hello everyone,</SPAN><BR /><BR /><SPAN> I need to know the following related issues for CAN protocol.</SPAN><BR /><SPAN> 1) cdo we use the ID 0 in the CAN message transfer?</SPAN><BR /><SPAN> 2) In most of the cases in the CAN network how the collision resolution happens. without arbitration is it possible to resolve the collision? </SPAN><BR /><SPAN> 3) Most of the cases because of REC (Receive error cout) the node not goes to the BUS OFF states, May i know the reason, </SPAN><BR /><BR /><BR /></BODY></HTML> Wed, 15 Jun 2016 16:36:06 GMT https://community.nxp.com/t5/LPC-Microcontrollers/CAN-Protocol-related-Queries/m-p/521679#M4317 lpcware 2016-06-15T16:36:06Z