https://community.nxp.com/t5/LPC-Microcontrollers/Firmware-loading-on-LPC11u37-in-Linux-fails/m-p/1183062#M42873 <P>Hi,</P><P>I am trying to copy firmware.bin from my windows PC to a LPC11u37 in mass storage mode. This is working properly fine and after reboot the firmware is activated. But I want to try the same to do in Linux, more specifically in RPi 3 B+ and than the copy works fine, but after reboot the firmware is not activated.</P><P>How can we activate the new firmware.bin from Linux ?</P> Fri, 13 Nov 2020 10:05:35 GMT BertVG 2020-11-13T10:05:35Z https://community.nxp.com/t5/LPC-Microcontrollers/Firmware-loading-on-LPC11u37-in-Linux-fails/m-p/1183062#M42873 <P>Hi,</P><P>I am trying to copy firmware.bin from my windows PC to a LPC11u37 in mass storage mode. This is working properly fine and after reboot the firmware is activated. But I want to try the same to do in Linux, more specifically in RPi 3 B+ and than the copy works fine, but after reboot the firmware is not activated.</P><P>How can we activate the new firmware.bin from Linux ?</P> Fri, 13 Nov 2020 10:05:35 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Firmware-loading-on-LPC11u37-in-Linux-fails/m-p/1183062#M42873 BertVG 2020-11-13T10:05:35Z https://community.nxp.com/t5/LPC-Microcontrollers/Firmware-loading-on-LPC11u37-in-Linux-fails/m-p/1183569#M42887 <P>Hi&nbsp;</P> <P>Maybe this discussion can help you.&nbsp;</P> <P><A href="https://community.nxp.com/t5/LPC-Microcontrollers/Flashing-using-USB-MSC-ISP-on-Linux-vs-Windows-LPC11U6x/m-p/542227" target="_blank">https://community.nxp.com/t5/LPC-Microcontrollers/Flashing-using-USB-MSC-ISP-on-Linux-vs-Windows-LPC11U6x/m-p/542227</A></P> <P>&nbsp;</P> <P>Best Regards</P> <P>Jun Zhang</P> Mon, 16 Nov 2020 03:41:02 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Firmware-loading-on-LPC11u37-in-Linux-fails/m-p/1183569#M42887 ZhangJennie 2020-11-16T03:41:02Z