Configuring the LPCXpresso55S69 to debug an off-board target

woshieric123456 — Fri, 06 Nov 2020 07:44:45 GMT

I am trying to use the EVK-board as a debugging probe for an external prototype board.

what I have done:

1.Power the LPCXpresso55S69 board from the Link USB connector P6, and fit jumper J3 across pins 2 - 3 (External Target);

2.J5 is fitted;

3. The Link2 Debug Probe SWD is connected by three lines(SWDIO/SWDCLK/SWO) between the P7 connector to the off-board target MCU SWD interface.

I just wanna share this info.

Re: Configuring the LPCXpresso55S69 to debug an off-board target

xiangjun_rong — Fri, 06 Nov 2020 09:17:38 GMT

Hi, Eric,

Great idea, with the LPC55S69-EVK board debugging probe, you can download your off board LPC family.

With J5 closed, the on-board LPC55S69 can NOT receive the SWCLK signal, the on-board SWDIO is input, so your solution is okay.

XiangJun Rong