LPC MicrocontrollersのトピックRe: DFU mode without using boot pins and reset

DFU mode without using boot pins and reset

Anusha1 — Fri, 18 Sep 2020 06:18:03 GMT

Hi, I am using the LPC4367 board, I have uploaded the LPCopen3.02 dfu composite code into the target, once I plug into target USB it is showing as per the attached image in the device manager.

When I open LPCscrypt and give boot_lpcscrypt.cmd, I am getting the following error

Invalid DFU suffix signature
A valid DFU suffix will be required in a future dfu-util release!!!

Cannot open DFU device 1fc9:0089
No DFU capable USB device available

Can anyone help what is the solution?

Thanks in Advance

Re: DFU mode without using boot pins and reset

ZhangJennie — Mon, 21 Sep 2020 07:58:10 GMT

According to the readme file of this demo, to test DFU download feature of the example. Use the dfu-util.exe available in MCUXpresso IDE install folder.

Can you please try to test it with dfu-util.exe?

Re: DFU mode without using boot pins and reset

Anusha1 — Mon, 21 Sep 2020 09:15:31 GMT

Hi, thank you for the response, we tried dfu-util.exe as u suggested and we got the following error.

Re: DFU mode without using boot pins and reset

Anusha1 — Mon, 21 Sep 2020 12:07:41 GMT

Hi, I tried to download and got this error, Is there somewhere I am going wrong?

kindly give me some suggestions

Thanks in Advance

Re: DFU mode without using boot pins and reset

ZhangJennie — Tue, 22 Sep 2020 08:44:46 GMT

Please let me know what application (or project name) do you work with this part? We will check it further.

Re: DFU mode without using boot pins and reset

Anusha1 — Tue, 22 Sep 2020 10:03:44 GMT

Hi ZhangJennie,

We are developing a projector with a computing system, By default, the MCU and Host connected with the USB interface in the PCB.

Our Requirement needs to update the firmware in the field if any update needs to be done online.

So we are trying to update the firmware using LPC open, usbd_rom_dfu_compsite example but we got an error as mentioned in the above post.

Please help us to resolve this issue.

Re: DFU mode without using boot pins and reset

ZhangJennie — Fri, 25 Sep 2020 08:46:00 GMT

I reproduced your issue with this demo code on my side.

I checked it internally with other team, it is confirmed there is problem.

I have reported it. If any feedback, will let you know.

Re: DFU mode without using boot pins and reset

Anusha1 — Fri, 25 Sep 2020 10:59:15 GMT

Hi ZhangJennie

Thanks for your response, Is there any user code to enter ISP mode for LPC4367 without making P2.7 low or any reset.

Or Is there any example to update firmware online in the field without any hardware changes or any reset?

Re: DFU mode without using boot pins and reset

ZhangJennie — Sun, 27 Sep 2020 01:26:06 GMT

We have AN12037

https://www.nxp.com/docs/en/application-note/AN12037_LPC11U6x.zip

it's not for your part but you can refer it to develop your code.

Have a nice day,

Jun Zhang

Re: DFU mode without using boot pins and reset

Anusha1 — Mon, 05 Oct 2020 06:12:12 GMT

Hi ZhangJennie

Any updates regarding that example code?

Re: DFU mode without using boot pins and reset

Anusha1 — Mon, 05 Oct 2020 13:15:22 GMT

Hi,

Did you get any feedback regarding the LPCopen dfu_composite example error?

any updates please let me know, Is there any example for dfu other than the LPCopen, we are waiting for your reply, the dfu code has been pending in our development

kindly someone replies as soon as possible

Thanks in Advance

Re: DFU mode without using boot pins and reset

bernhardfink — Tue, 06 Oct 2020 07:43:40 GMT

Did you check my recently provided example?

LPC1857 jump to USB/DFU bootloader from the application

Can't say for sure if the LPC4367 is supported, but if not this would solvable.

Regards,
Bernhard.