LPC Microcontrollers中的主题 Re: LPC1768, KEIL MCB1700 and AX-12 https://community.nxp.com/t5/LPC-Microcontrollers/LPC1768-KEIL-MCB1700-and-AX-12/m-p/521326#M4131 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by mc on Fri Oct 11 10:01:00 MST 2013</STRONG><BR /><SPAN>Hi ,</SPAN><BR /><SPAN>The question is not very clear here. Are you using UART of LPC1700 to cummunicate with servo motor? Do you mean you can not configure UART?</SPAN><BR /><SPAN>Please look UART example at</SPAN><BR /><SPAN><A class="jive-link-external-small" href="https://community.nxp.com/external-link.jspa?url=http%3A%2F%2Fwww.lpcware.com%2Fcontent%2Fnxpfile%2Flpc175x6x-cmsis-compliant-standard-peripheral-firmware-driver-library-keil-iar-gnu" rel="nofollow" target="_blank">http://www.lpcware.com/content/nxpfile/lpc175x6x-cmsis-compliant-standard-peripheral-firmware-driver-library-keil-iar-gnu</A></SPAN></BODY></HTML> Wed, 15 Jun 2016 17:49:32 GMT lpcware 2016-06-15T17:49:32Z LPC1768, KEIL MCB1700 and AX-12 https://community.nxp.com/t5/LPC-Microcontrollers/LPC1768-KEIL-MCB1700-and-AX-12/m-p/521325#M4130 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Guiziouzou on Fri Oct 11 08:10:17 MST 2013</STRONG><BR /><SPAN>Hello,</SPAN><BR /><BR /><SPAN>I have to send an instruction packet to the servo motor AX-12 located on the pin P0.2 and P0.3 (RX and TX) of the board KEIL MCB1700.</SPAN><BR /><SPAN>I already know what looks like my instruction packet, but I don't know how to send it.</SPAN><BR /><BR /><SPAN>Can anybody help me please ?</SPAN><BR /><BR /><SPAN>Thank you.</SPAN></BODY></HTML> Wed, 15 Jun 2016 17:49:31 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1768-KEIL-MCB1700-and-AX-12/m-p/521325#M4130 lpcware 2016-06-15T17:49:31Z Re: LPC1768, KEIL MCB1700 and AX-12 https://community.nxp.com/t5/LPC-Microcontrollers/LPC1768-KEIL-MCB1700-and-AX-12/m-p/521326#M4131 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by mc on Fri Oct 11 10:01:00 MST 2013</STRONG><BR /><SPAN>Hi ,</SPAN><BR /><SPAN>The question is not very clear here. Are you using UART of LPC1700 to cummunicate with servo motor? Do you mean you can not configure UART?</SPAN><BR /><SPAN>Please look UART example at</SPAN><BR /><SPAN><A class="jive-link-external-small" href="https://community.nxp.com/external-link.jspa?url=http%3A%2F%2Fwww.lpcware.com%2Fcontent%2Fnxpfile%2Flpc175x6x-cmsis-compliant-standard-peripheral-firmware-driver-library-keil-iar-gnu" rel="nofollow" target="_blank">http://www.lpcware.com/content/nxpfile/lpc175x6x-cmsis-compliant-standard-peripheral-firmware-driver-library-keil-iar-gnu</A></SPAN></BODY></HTML> Wed, 15 Jun 2016 17:49:32 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1768-KEIL-MCB1700-and-AX-12/m-p/521326#M4131 lpcware 2016-06-15T17:49:32Z