LPC MicrocontrollersのトピックRe: Reader for SL3S1203_1213 Part 2

Reader for SL3S1203_1213 Part 2

leo94 — Tue, 07 Jul 2020 08:33:29 GMT

Hello,

From a previous answer to this question. You suggested buying the reader Impinj Speedway Revolution R220 UHF RFID reader to read the tamper flag of SL3S1203_1213.

I tried to buy the reader through impinj, and they said that they do not support this funciton. I am a bit confused right now.

Can i read the tamper with Impinj Speedway Revolution R220 even if it is not supported by impinj?

Is the process sraightforward?

Do you have your own software/libraries to extract the information of the tamper bit ?

Is there a reader/software package that makes the tamper bit aquisition straighforward?

Thanks,

Leo

Re: Reader for SL3S1203_1213 Part 2

Kan_Li — Thu, 09 Jul 2020 08:10:54 GMT

Hi Leo,

If you want to read the tamper flag from the config word, Please try word offset=32 and word count=1, And for the bit point, please try bit point=512 and length = 16b(1 word).

Hope that helps,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------