LPC MicrocontrollersのトピックRe: Hard reset https://community.nxp.com/t5/LPC-Microcontrollers/Hard-reset/m-p/1055134#M40863 <HTML><HEAD></HEAD><BODY><P>Avinash G</P><P>Keil IDE debugger can reset application, but I think it is SW reset.</P><P>LPC-Link2 supports ISP HW reset and it can be set with MCUXpresso IDE:</P><P><A href="https://community.nxp.com/thread/389040">ISP Reset over debug</A>&nbsp;</P><P></P><P>Keil MDK is not NXP project. I suggest you contact Keil for this issue.</P><P></P><P>Have a nice day</P><P>Jun Zhang</P></BODY></HTML> Fri, 22 May 2020 06:16:27 GMT ZhangJennie 2020-05-22T06:16:27Z Hard reset https://community.nxp.com/t5/LPC-Microcontrollers/Hard-reset/m-p/1055133#M40862 <HTML><HEAD></HEAD><BODY><P>Is it possible to hard reset the LPC1769 controller using the LPC-LINK2 controller?&nbsp;</P><P>We are using Keil IDE for our development.</P><P>regards,</P><P>Avinash.&nbsp;</P></BODY></HTML> Thu, 21 May 2020 08:01:48 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Hard-reset/m-p/1055133#M40862 TEMCEFF 2020-05-21T08:01:48Z Re: Hard reset https://community.nxp.com/t5/LPC-Microcontrollers/Hard-reset/m-p/1055134#M40863 <HTML><HEAD></HEAD><BODY><P>Avinash G</P><P>Keil IDE debugger can reset application, but I think it is SW reset.</P><P>LPC-Link2 supports ISP HW reset and it can be set with MCUXpresso IDE:</P><P><A href="https://community.nxp.com/thread/389040">ISP Reset over debug</A>&nbsp;</P><P></P><P>Keil MDK is not NXP project. I suggest you contact Keil for this issue.</P><P></P><P>Have a nice day</P><P>Jun Zhang</P></BODY></HTML> Fri, 22 May 2020 06:16:27 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Hard-reset/m-p/1055134#M40863 ZhangJennie 2020-05-22T06:16:27Z