LPC MicrocontrollersのトピックRe: LPCxpresso uart burning

LPCxpresso uart burning

wade985136 — Thu, 20 Aug 2020 09:33:20 GMT

IDE use LPCxpresso V8.2.2
IC 1837JBD144
1. I want to burn 1837 through UART, but I modified board.c. Pin is amended as follows

2. Or only burn through flashMagic software? But IDE LPCxpresso V8.2.2 does not have .hex.

Please help me thanks

void Board_UART_Init(LPC_USART_T *pUART)
{
Chip_SCU_PinMuxSet(0x2, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1));/* P2.0 : UART0_TXD */
Chip_SCU_PinMuxSet(0x2, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1));/* P2.1 : UART0_RXD */
}

Re: LPCxpresso uart burning

converse — Thu, 20 Aug 2020 18:31:21 GMT

https://community.nxp.com/thread/450677

Re: LPCxpresso uart burning

wade985136 — Fri, 21 Aug 2020 02:27:14 GMT

hi Con Verse
I have resolved

2. Or only burn through flashMagic software? But IDE LPCxpresso V8.2.2 does not have .hex.

Please help me thanks

thank you

but IDE use LPCxpresso How to burn with uart

Re: LPCxpresso uart burning

converse — Fri, 21 Aug 2020 17:00:24 GMT

For creating hex files, MCUXpresso and LPCXpresso work the exact same way, as described here

MCUXpresso IDE: S-Record, Intel Hex and Binary Files | MCU on Eclipse

Re: LPCxpresso uart burning

wade985136 — Sat, 22 Aug 2020 16:20:30 GMT

How to use 18s37 through uart debug.
I want to burn 1837 through UART, but I modified board.c.

Re: LPCxpresso uart burning

wade985136 — Mon, 24 Aug 2020 02:34:05 GMT

I have solved uart debug.

Solutions

board.h

DEBUG_SEMIHOSTING
DEBUG LPC_UART0

Cannot be opened at the same time

Thank you.