LPC MicrocontrollersのトピックLPC1100-based LPC-Link 2 ?

LPC1100-based LPC-Link 2 ?

IvoBCD — Thu, 16 Apr 2020 08:04:26 GMT

We're considering using an LPC-Link 2 debugger (OM13054UL) to program devices. Our distributors (eg. Element14) provide two variants of this debugger, one based on LPC1100, and another based on LPC4300.

On NXP's website, I can only find information about the LPC4300-based variant.

Is there really an LPC1100-based LPC-Link 2 ? Can it be used instead of the LPC4300-based variant ? If so, where can I find CMSIS-DAP firmware for the LPC1100-based LPC Link 2 ?

Best regards,

Ivo.

Re: LPC1100-based LPC-Link 2 ?

converse — Thu, 16 Apr 2020 16:45:55 GMT

NO, there is only one version of LPC-Link2 - it contains an LPC4300 device. It can, of course, be used to debug any NXP ARM Cortex-M based device.

Re: LPC1100-based LPC-Link 2 ?

jeremyzhou — Fri, 17 Apr 2020 02:06:12 GMT

Hi Ivo Clarysse,

Thank you for your interest in NXP Semiconductor products and
for the opportunity to serve you.
There's no such an LPC-link2 debug probe version that uses the LPC1100.
Hope this is clear.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------