LPC MicrocontrollersのトピックLPC1788 IAP programming https://community.nxp.com/t5/LPC-Microcontrollers/LPC1788-IAP-programming/m-p/521185#M4042 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by FrankAndersen on Mon Feb 15 07:42:12 MST 2016</STRONG><BR /><SPAN>Hi,</SPAN><BR /><BR /><SPAN>I have a program, that uses IAP for updating itself, I know it is with the risk of making it to a brick.</SPAN><BR /><BR /><SPAN>But untill now it has been working fine, but I now need to run the core at 96 MHz instead of 48 MHz.</SPAN><BR /><BR /><SPAN>I did change Param2 to 96000.</SPAN><BR /><BR /><SPAN>Sometimes it does not erase other times it does erase but does not write everything to the internal flash.</SPAN><BR /><BR /><SPAN>It looks like it makes a reset, in the middle of it all.</SPAN><BR /><BR /><SPAN>Any suggestions?</SPAN><BR /><BR /><SPAN>Best regards,</SPAN><BR /><BR /></BODY></HTML> Wed, 15 Jun 2016 17:51:57 GMT lpcware 2016-06-15T17:51:57Z LPC1788 IAP programming https://community.nxp.com/t5/LPC-Microcontrollers/LPC1788-IAP-programming/m-p/521185#M4042 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by FrankAndersen on Mon Feb 15 07:42:12 MST 2016</STRONG><BR /><SPAN>Hi,</SPAN><BR /><BR /><SPAN>I have a program, that uses IAP for updating itself, I know it is with the risk of making it to a brick.</SPAN><BR /><BR /><SPAN>But untill now it has been working fine, but I now need to run the core at 96 MHz instead of 48 MHz.</SPAN><BR /><BR /><SPAN>I did change Param2 to 96000.</SPAN><BR /><BR /><SPAN>Sometimes it does not erase other times it does erase but does not write everything to the internal flash.</SPAN><BR /><BR /><SPAN>It looks like it makes a reset, in the middle of it all.</SPAN><BR /><BR /><SPAN>Any suggestions?</SPAN><BR /><BR /><SPAN>Best regards,</SPAN><BR /><BR /></BODY></HTML> Wed, 15 Jun 2016 17:51:57 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1788-IAP-programming/m-p/521185#M4042 lpcware 2016-06-15T17:51:57Z