topic Re: LPC-Linkv2 full speed usb in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/LPC-Linkv2-full-speed-usb/m-p/1033670#M40255 <HTML><HEAD></HEAD><BODY><P>Hello Piotr,</P><P></P><P>In order to better understand what you are trying to achieve. Could you please describe what your target mcu is as well?</P><P>So far my understanding is that you are connecting your LPC-Link 2 to your Linux machine on one end and then via SWD you are connecting your target mcu. However your LPC-link 2 is not communicating properly with your linux machine. Is this correct?</P><P>Could you please attach screen shots of any error messages that you are receiving.</P><P>Best Regards,</P><P>Sabina</P></BODY></HTML> Fri, 13 Dec 2019 17:29:42 GMT Sabina_Bruce 2019-12-13T17:29:42Z LPC-Linkv2 full speed usb https://community.nxp.com/t5/LPC-Microcontrollers/LPC-Linkv2-full-speed-usb/m-p/1033669#M40254 <HTML><HEAD></HEAD><BODY><P>I have an issue with programming via lpclinkv2 SWD interface on linux. LPC-Linkv2 doesn't accept full speed (12Mbps) usb and require high speed (480Mbps). I would like to use usb isolator which limits speed to full-speed but it doesn't work toogether. Is possible to force usb full-speed on lpclink and use this speed to flash/debug mcu?</P></BODY></HTML> Wed, 11 Dec 2019 15:48:40 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC-Linkv2-full-speed-usb/m-p/1033669#M40254 p_barcinski 2019-12-11T15:48:40Z Re: LPC-Linkv2 full speed usb https://community.nxp.com/t5/LPC-Microcontrollers/LPC-Linkv2-full-speed-usb/m-p/1033670#M40255 <HTML><HEAD></HEAD><BODY><P>Hello Piotr,</P><P></P><P>In order to better understand what you are trying to achieve. Could you please describe what your target mcu is as well?</P><P>So far my understanding is that you are connecting your LPC-Link 2 to your Linux machine on one end and then via SWD you are connecting your target mcu. However your LPC-link 2 is not communicating properly with your linux machine. Is this correct?</P><P>Could you please attach screen shots of any error messages that you are receiving.</P><P>Best Regards,</P><P>Sabina</P></BODY></HTML> Fri, 13 Dec 2019 17:29:42 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC-Linkv2-full-speed-usb/m-p/1033670#M40255 Sabina_Bruce 2019-12-13T17:29:42Z