LPC54608 eva board SDRAM pattern

実奥山 — Thu, 30 Jan 2020 07:43:29 GMT

In LPC54608 eva board(OM13092),LPC54608 eva board
I want to make the SDRAM transmission line in good condition
There is a resistors(RP3) between CPU(U25) and SDRAM(U28) in LPC54608 eva board(OM13092).
Is RP3 located closer to U25 or U28?

Re: LPC54608 eva board SDRAM pattern

xiangjun_rong — Fri, 31 Jan 2020 10:29:28 GMT

Hi, 実奥山 ,

As you know that the resistor pack RP2,RP3,RP4 and RP4 are used to reduce the signal reflection, from signal integrity analysis, they should be put close to SDRAM.

We have documentation which focuses on signal integrity for high speed signals.

https://www.nxp.com/docs/en/user-guide/IMX8MNHDG.pdf

The section 1.3.1. General information lists the documentation which focuses on the high speed board design, I think they are helpful.

XiangJun rong

topic Re: LPC54608 eva board SDRAM pattern in LPC Microcontrollers

LPC54608 eva board SDRAM pattern

Re: LPC54608 eva board SDRAM pattern