UM10360 Modem Control Register explanation might be incorrect

nakano-r — Thu, 21 Nov 2019 04:32:07 GMT

Hi, there.

UM10360 Chap.15 page338

"If Auto-RTS mode is disabled, the RTSen bit controls the RTS1 output of the UART1...."

I think RTSen bit is not correct, because RTSen bit dedicated to enable or disable flow control. I guess "RTS Control bit" is correct.

Am I right? Please follow me.

Re: UM10360 Modem Control Register explanation might be incorrect

Alice_Yang — Mon, 25 Nov 2019 04:00:25 GMT

Hello rick nack ,

Yes, you are right , it may be a typo in UM.

" If Auto-RTS mode is disabled, the RTSCTRL bit controls the RTS1 output of the UART1.

Hope it helps,

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: UM10360 Modem Control Register explanation might be incorrect in LPC Microcontrollers

UM10360 Modem Control Register explanation might be incorrect

Re: UM10360 Modem Control Register explanation might be incorrect