LPC MicrocontrollersのトピックRe: LPC802: SocketException when debugging with LinkServer

LPC802: SocketException when debugging with LinkServer

mattwalk — Wed, 12 Feb 2020 02:31:57 GMT

Hello,

When attempting to debug my LPC802 board in MCUXpresso, I run into a SocketException error. I have attached the relevant information regarding this error.

My coworker's board works on my PC and my board works on my coworkers PC, therefore, the problem is isolated to my board on my PC.

I have attempted uninstalling all relevant SDKs, VCOM drivers and MCUXpresso but the error persists each time I reinstall.

I tried to debug further with a SEGGER J-Link and the connection was refused aswell.

I am using Windows 10 Pro 64-bit (10.0, build 17763), MCUXpresso IDE v11.10_3209

I am not sure how to continue, any help would be appreciated!

- Matt

Re: LPC802: SocketException when debugging with LinkServer

ZhangJennie — Wed, 12 Feb 2020 08:28:44 GMT

Do you use a demo board or your own PCB?

You use external SEGGER J-Link debugger? besides, segger J-link, did you try connection with other tool? for instance LPC Link2?

Did your board ever connect your debug probe once?

Have a nice day,

Jun Zhang

Re: LPC802: SocketException when debugging with LinkServer

mattwalk — Thu, 13 Feb 2020 19:58:57 GMT

I am unsure what you mean by a demo board or my own PCB. I currently am using the bare board with no peripherals attached.

I used an external SEGGER J-Link debugger; however, it was unable to establish a connection with the LPC802 either, saying that the board refused the connection. I do not have access to other external debuggers at the moment.

The board used to connect to the debug probe, one morning it just stopped working.

I am debugging as MCUXpresso IDE LinkServer.

- Matt

Re: LPC802: SocketException when debugging with LinkServer

ZhangJennie — Fri, 14 Feb 2020 04:50:54 GMT

please try if you can connect board in isp mode.

To identify if the problem is caused by IDE, follow attached video to check if your PC can detect MCU core via Jlink.

Re: LPC802: SocketException when debugging with LinkServer

Livio — Thu, 25 Feb 2021 21:09:39 GMT

Hello Matt

Were you able to fix the problem?

I'm trying to debug an LPC845 breakout board, but get the exact same exception as you each time.
Another board with a J-Link debugger works fine on my PC.

Livio

Re: LPC802: SocketException when debugging with LinkServer

converse — Thu, 25 Feb 2021 22:03:42 GMT

My guess would be to check your firewall. It may be preventing the debugger from communicating with gdb, which it does via sockets.