LPC55S69 : Gpio pin configurations

EugeneHiihtaja — Thu, 31 Oct 2019 13:18:05 GMT

Hello !

In UM is mentioned that Pull-up/pull-down resistor can be configured for almost any GPIO pin.

But it is not clear if resistors available when pin configured as input or output.

Or it dosn't matter , both resistors available for input and output pins like ?

Regards,

Eugene

Re: LPC55S69 : Gpio pin configurations

Alice_Yang — Sun, 03 Nov 2019 03:57:53 GMT

Hello Eugene Hiihtaja,

Yes, it dosn't matter , both resistors available for input and output pins .

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

LPC Microcontrollers中的主题 Re: LPC55S69 : Gpio pin configurations

LPC55S69 : Gpio pin configurations

Re: LPC55S69 : Gpio pin configurations