LPC Microcontrollers中的主题 Re: How can we view the registers used while debugging in LPCXpresso?

How can we view the registers used while debugging in LPCXpresso?

naveen_b160496e — Tue, 04 Feb 2020 14:33:25 GMT

The board used is LPC Link2 with LPC 4370 MC. Program for HSADC was debugged. We were unable to find the registers used.

Re: How can we view the registers used while debugging in LPCXpresso?

ZhangJennie — Wed, 05 Feb 2020 05:56:33 GMT

Hi Naveen C P

Please see answer below:

How can we view the registers used while debugging in LPCXpresso?

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: How can we view the registers used while debugging in LPCXpresso?

naveen_b160496e — Wed, 12 Feb 2020 11:11:16 GMT

Sir

Can you attach the correct link. I am not able to find the answer in that.

Regards

Naveen

Re: How can we view the registers used while debugging in LPCXpresso?

ZhangJennie — Thu, 13 Feb 2020 03:41:28 GMT

Hi Naveen,

To check peripheral registers, Please go to menu "Window", "Show View", "Other..."

double click on "Peripherals+",

To check core register,

LPCXpresso Core Registers View

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!