How to use the IAR development LPC2294?

503789404 — Mon, 10 Jun 2019 09:05:20 GMT

who have a demo about IAR (LPC2294),i want to use IAR for ARM development LPC2294,but i can't find demo about iAR()LPC2294 on the internet

Re: How to use the IAR development LPC2294?

Alexis_A — Wed, 12 Jun 2019 16:09:30 GMT

Hi 503789404@qq.com‌,

First of all, if you are starting a new development now, I would strongly recommend that you consider using a Cortex-M based MCU - such as the LPC4xxx or LPC54xxx (or a Kinetis MCU or i.MX RT) - rather than the old ARM7 based MCUs in the LPC2xxx family due to this family is not recommended for new designs as you can see in the below link.

https://www.nxp.com/part/LPC2294HBD144?lang=en&lang_cd=en&

However, if you want to develop using LPC2000 you can take a look to the Sample Code Bundle for LPC213X and LPC214X Peripheral from the link below that is compatible with the MCU you're using

https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc2000-arm7-mcus/single-chip-16-32-bit-microcontrollers-32-64-128-256-512-kb-isp-iap-flash-with-10-bit-adc-and-dac:LPC2138FBD64?&tab=Design_Tools_Tab

Unfortunately is only available for Keil, sorry for the inconveniences this may cause you.

Best regards,

Alexis Andalon

topic How to use the IAR development LPC2294? in LPC Microcontrollers

How to use the IAR development LPC2294?

Re: How to use the IAR development LPC2294?