Need help getting started with OM13054 boards

zmrwest — Sun, 22 Sep 2019 22:04:03 GMT

I'm new to NXP LPC's and I am starting a project with 2 OM13054 boards in hand. I have MCUXpresso installed and I am trying to debug peripheral blink program. I get a "can't connect error". I remember reading that I could use one link 2 board to debug the target board but can't find any details on how to do that. How do I setup to use one 54 board to debug the other?

Also, I'm trying to use the config tool to look at the lpc4370 pins but I can figure out how to do that.

Thanks in advance, Bill

Re: Need help getting started with OM13054 boards

ZhangJennie — Mon, 23 Sep 2019 07:36:35 GMT

You want to use OM13054 boards as LPC-Link2 debug tool. Thus please follow this picture to connect the board:

For more about LPC-Link2, see LPC-Link2 | NXP

There are several video on this link which tells how to use it.

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

LPC MicrocontrollersのトピックNeed help getting started with OM13054 boards

Need help getting started with OM13054 boards

Re: Need help getting started with OM13054 boards