LPC MicrocontrollersのトピックLPC 54018 Debug Issue

LPC 54018 Debug Issue

yashbohra80 — Thu, 06 Jun 2019 01:36:41 GMT

I am trying to program LPC 54018 IOT Module using MCU IDE using PE Micro but when I try to debug a sample LED Blinky program,I get an error message saying that error in FLASH PROGRAM . terminate debug session.

In getting started session i checked i need to update qc firmware file , but while trying to do so I am not able to find qc firmware update file in SDK Version 2.5

Re: LPC 54018 Debug Issue

ZhangJennie — Thu, 06 Jun 2019 07:33:00 GMT

Hi yash bohra

Not sure if I correctly understand your questions. Do you mean your IDE debugger can't launch debugger?

If so, you can try update on board debug firmware with referring this thread.

LPC54608 board doesnt see any debug probes

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: LPC 54018 Debug Issue

yashbohra80 — Thu, 06 Jun 2019 13:23:21 GMT

Hi ,

Thank you for your response. It is working now, there was some problem with USB.

Re: LPC 54018 Debug Issue

ZhangJennie — Mon, 10 Jun 2019 03:00:28 GMT

You are welcome.