usart receiving problem?

aravindpb5009 — Wed, 21 Aug 2019 08:42:08 GMT

Hai

i am using LPC824 MCUXPRESSO when i try to receive the char from the usart by using usb to serial converter , i open the terminal in my mcuxpresso ide and typed the char but that was unable to recive in my code , i used the example code which provided in mcuxpressso usart_polling example , i don't know what type of wrong i doing please let me know the solution

Thanks&Regards

Aravind p

Re: usart receiving problem?

Alice_Yang — Thu, 22 Aug 2019 10:17:02 GMT

Hello Aravind palanisamy,

Please first confirm the UART pins you connect are the same with configuration in project.

And how about send character from board to PC?

If still can't work, please take a screenshot about your typed the char , I will test it on my side.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

LPC MicrocontrollersのトピックRe: usart receiving problem?

usart receiving problem?

Re: usart receiving problem?