ADC interrupt

lpcware — Wed, 15 Jun 2016 17:45:20 GMT

Content originally posted in LPCWare by Mallikarjuna on Mon Jun 06 06:34:59 MST 2016
Daer All

i want do adc with interrupt for that i did initialization mentioned below (void ADC_init(void) ); but it is not generating interrupt nor

not going to interrupt. please check initialization and let me know correct or not.?!

Thank you:-)

void ADC_Init (void) {
LPC_SC->PCONP       |= (1<<12);                  /* Enable power to ADC block */
LPC_PINCON->PINSEL1 &= ~(1UL<<18);
LPC_PINCON->PINSEL1 |= (1UL<<18);        /* select AD2 pin */
LPC_SC->PCLKSEL0 =     (0 << 24);
LPC_ADC->ADCR       =   (1 << 2) |               /* select AD0.2 pin */
                                           (4 << 8) |               /* ADC clock is 25MHz/4 */
           (5 << 16) |              /* Burst Bit */
           (1 << 21) |              /* enable ADC */
           (1 << 24) |              /*Start conversion now*/
           (1 << 27) ;              /*Start conversion on a falling edge*/

LPC_ADC->ADINTEN = 0x00000004;
NVIC_EnableIRQ(ADC_IRQn);
}

void ADC_IRQHandler(void)
{
uint32_t adGdr = 0,sTatus = 0,Dummy = 0;
sTatus = LPC_ADC->ADSTAT;
adGdr = LPC_ADC->ADGDR;
Dummy = LPC_ADC->ADDR2;
adGdr = ((adGdr >> 4) & ADC_VALUE_MAX);

}

Re: ADC interrupt

lpcware — Sun, 19 Jun 2016 01:12:36 GMT

bump

Re: ADC interrupt

rons — Sun, 19 Jun 2016 19:22:05 GMT

Two things I think you should change:

Assign the pin mode to "NONE" . Do not assign as "PULL-UP" or "PULL-DOWN"

Don't start the conversion until the NVIC is initialized for the ADC interrupt.

Re: ADC interrupt

rons — Tue, 26 Jul 2016 10:12:35 GMT

You are not clearing the pending state in ICPR0 register.

I suggest you see that your code works in polling mode first

LPC MicrocontrollersのトピックADC interrupt

ADC interrupt

Re: ADC interrupt

Re: ADC interrupt

Re: ADC interrupt