LPC MicrocontrollersのトピックRe: A question about MCUXpresso Config Tools

A question about MCUXpresso Config Tools

afzhang — Wed, 19 Jun 2019 09:45:09 GMT

Our company used LPC54016JET100 chip.I have a problem that I used MCUXpresso Config Tools,but it does not contain LPC54016JET100.Which type do i choose in MCUXpresso Config Tools?

Re: A question about MCUXpresso Config Tools

soledad — Thu, 27 Jun 2019 14:38:55 GMT

Hi,

Please follow the bellow steps,

1. Select "Create a new standalon ..." and click Next

2. Select LPC54000 -> LPC54016, on "Select processor package" select the device you need,

Have a great day,
Sol

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: A question about MCUXpresso Config Tools

afzhang — Fri, 28 Jun 2019 01:40:30 GMT

Hi,

Thanks!

B/R

Aifei Zhang

发件人: soledad

发送时间: 2019年6月27日 22:39

收件人: Aifei Zhang

主题: Re: - Re: A question about MCUXpresso Config Tools

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

Re: A question about MCUXpresso Config Tools

reply from soledad <https://community.nxp.com/people/soledad?et=watches.email.thread> in LPC Microcontrollers - View the full discussion <https://community.nxp.com/message/1170716?commentID=1170716&et=watches.email.thread#comment-1170716>