topic Re: Uart SBL for LPC546 in LPC Microcontrollers

Uart SBL for LPC546

fatihozen — Wed, 04 Sep 2019 05:44:27 GMT

Hello,

In LPC546 - Programmierschnittstelle zu PC per USB question, there was mentioned about a project.

Related project about this topic is Keil project. https://www.nxp.com/docs/en/application-note-software/AN12384SW.zip

Is it possible to change it to McuXpresso IDE and then may I debug it for OM13092 kit ?

Re: Uart SBL for LPC546

ZhangJennie — Wed, 04 Sep 2019 08:50:25 GMT

Hi Fitih,

So far this demo code doesn't have MCUXpresso IDE version.

For sure this application can be done by MCUXpresso IDE but user needs to migrate it by self.

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Uart SBL for LPC546

fatihozen — Wed, 04 Sep 2019 09:28:24 GMT

Hi ZhangJennie ,
I could not find how to implement a project from Keil to MCU Xpresso IDE. I have just tried and failed about it that's why I ask how to do that ?

Re: Uart SBL for LPC546

ZhangJennie — Thu, 05 Sep 2019 05:03:38 GMT

Hi Fitih,

As I know, we don't have Keil to MCUXpresso IDE porting guide.

To do it, I suggest you create a new MCUXpreso demo code under MCUXpresso IDE, then import the Keil code part by part manually.

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!