LPC MicrocontrollersのトピックRe: serial print problem

serial print problem

aravindpb5009 — Tue, 18 Jun 2019 06:25:47 GMT

hai

I got the ADC value in LPC824 the value of adc is printing IDE console but when i try to send that value to serial UART it doesnt take i don't know why value is not accepting in serial . i tried to print the string in serial , string values what i send that properly transfer in my serial terminal but the value only not printing in serial . please find my attachment how i used to send the serial values

Re: serial print problem

Alice_Yang — Wed, 19 Jun 2019 08:04:02 GMT

Hello Aravind palanisamy ,

Please check whether use the same UART port in your code and hardware, check the pins in hardware.

You can first send a simple character to test UART.

Hope it helps,

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: serial print problem

aravindpb5009 — Wed, 19 Jun 2019 09:31:14 GMT