LPC Microcontrollers中的主题 Re: example code for usb virtual com port using lpc54628

example code for usb virtual com port using lpc54628

allevato_loris — Wed, 03 Jul 2019 14:28:40 GMT

Dear sirs,

I need example code for usb virtual com port to communicate data to pc windows 7.

Thanks for the help.

With regards

Loris

Re: example code for usb virtual com port using lpc54628

jeremyzhou — Thu, 04 Jul 2019 02:05:08 GMT

Hi Loris Allevato,

Thank you for your interest in NXP Semiconductor products and
for the opportunity to serve you.
To provide the fastest possible support, I'd like to recommend you to refer to the USB CDC demos in the SDK library.
SDK download link:
https://mcuxpresso.nxp.com/en/welcome

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: example code for usb virtual com port using lpc54628

allevato_loris — Thu, 04 Jul 2019 07:01:56 GMT

Dear jeremyzhou,

I tried with the 2.5.0 version of the SDK but Windows 7 does not recognize the USB port, do I have to install any driver? If yes where can I find it?

In my application I have to send data (strings) from the board to the pc, it could indicate the most appropriate example from which to start.

Thanks to the availability

With regards

Loris

Re: example code for usb virtual com port using lpc54628

jeremyzhou — Fri, 05 Jul 2019 07:52:58 GMT

Hi Loris Allevato,

It exists an inf folder in USB CDC demo's directory, and in that folder, it contains the driver file, please check it.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!