Adding SPI Hardware to OM13098

anealca — Wed, 29 May 2019 17:33:17 GMT

What connector pins (J10,11,12?) can I to add an SPI DAC to the OM13098 development board without disabling any of the hardware on the board?

I think I can use Flexcomm 9.

Re: Adding SPI Hardware to OM13098

jeremyzhou — Thu, 30 May 2019 02:36:26 GMT

Hi Adrian Neal ,

Thank you for your interest in NXP Semiconductor products and
for the opportunity to serve you.
It's available to use two below sets of pins to connect an external SPI device, please give a try.

Pin Name   Board Location
MISO          J9 pin 11
MOSI          J9 pin 13
PCS0          J9 pin 15
SCK            J9 pin 9

Pin Name Board Location
MISO           J13 pin 12
MOSI     J13 pin 2
PCS0            J9   pin 3
SCK             JP11 pin 2

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: Adding SPI Hardware to OM13098 in LPC Microcontrollers

Adding SPI Hardware to OM13098

Re: Adding SPI Hardware to OM13098