topic Re: Clock Config Tool returns undeclared identiefier in LPC Microcontrollers

Clock Config Tool returns undeclared identiefier

dingelen — Fri, 27 Sep 2019 08:43:02 GMT

Hi,

I'm using the SDK 2.6.3 on an LPC55S69 and while setting up the clocks, the code generator uses an undefined identifier.

It's the ANACTRL_XO32M_CTRL_SLAVE_MASK identifier and it isn't defined in the CMSIS Peripheral Access Layer for LPC55S69_cm33_core0

After some searching I found it a reference in the "clock_config_c.js" file but again, that's the only reference and on compilation it throws out errors.

I found this to be the case in both the stand-alone tool as in the IDE.

What shoudl this value be? Can I change it manually?

Thanks!

Tom

Re: Clock Config Tool returns undeclared identiefier

Alice_Yang — Sat, 28 Sep 2019 03:13:16 GMT

Hello Tom Vandingelen ,

Please send your whole project to me, btw, which version of IDE do you used?

Alice

Re: Clock Config Tool returns undeclared identiefier

dingelen — Mon, 30 Sep 2019 09:07:24 GMT

IDE v11.0.1 (latest)

SDK 2.6.3 (latest)

Re: Clock Config Tool returns undeclared identiefier

dingelen — Mon, 30 Sep 2019 09:07:25 GMT

Attached you can find an example of the problem.

Re: Clock Config Tool returns undeclared identiefier

Alice_Yang — Tue, 08 Oct 2019 08:51:40 GMT

Hello Tom,

Yes, I can reproduce the issue on my side.

The value of "ANACTRL_XO32M_CTRL_SLAVE_MASK" should be 0x10.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------