serial problem

aravindpb5009 — Wed, 12 Jun 2019 09:07:11 GMT

hai

when i try to enter some value in serial port that time my entered value doesn't print in the serial as well as o/p also not coming please let me know the solution

In below i attached my error snaps please find the attachments below

Thanks & Regards

Aravind P

Re: serial problem

Alice_Yang — Fri, 14 Jun 2019 03:39:26 GMT

Hello Aravind P,

In this board, the Micro USB port(J3) only can send character, can't receive, because only the UART_TX connect to it.

So when run this demo, please connect the UART to your PC using TTL to USB.

In this demo, USART0_TXD connect to P0_7 USART0_RXD connect to P0_18 .

I test on my side ,it can work well:

Hope it helps,

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: serial problem

aravindpb5009 — Fri, 14 Jun 2019 04:47:19 GMT

Thank you for your valuable assistance

topic serial problem in LPC Microcontrollers

serial problem

Re: serial problem

Re: serial problem