topic How to run application using Lpcxpresso4367 (om13088) in non debug mode (standalone) in LPC Microcontrollers

How to run application using Lpcxpresso4367 (om13088) in non debug mode (standalone)

uaz — Fri, 24 May 2019 07:47:44 GMT

Hi,

I'm currently trying something on the lpcxpresso4367 board.

I found that I'm unable to run my application without debugging. The target MCU LPC4367 just won't boot the internal flash which I believe has been flashed with my application (during debug).

Is there any particular setting that I need to do?

My current setting:

* JP1 - pin 1&2 shorted

* JP11 - pin 2&3 shorted

* JP3, JP5, JP2, JP4, - open

* JP6 - shorted

I believe UM10946-om13084 user guide has some errors:

- In 6.2 and 6.2: JP1 and JP2 are switched.

Re: How to run application using Lpcxpresso4367 (om13088) in non debug mode (standalone)

converse — Fri, 24 May 2019 08:37:49 GMT

See the reply from LPCXpresso support in this thread:

https://community.nxp.com/thread/478633

Re: How to run application using Lpcxpresso4367 (om13088) in non debug mode (standalone)

uaz — Mon, 27 May 2019 01:46:11 GMT

Thanks! I totally missed that. It is now working fine without debugger