topic Re: eRPC support for LPC546xx in LPC Microcontrollers

eRPC support for LPC546xx

gbarcan — Wed, 01 May 2019 14:03:43 GMT

Hi,

Is eRPC supported on the LPC546xx ? Would anybody be able to offer any advice or guidance on using eRPC LPC546xx ?

Any help would be appreciated,

Thank you,

Re: eRPC support for LPC546xx

dusancervenka-b — Fri, 03 May 2019 06:27:19 GMT

Hi gbarcan@dialight.com‌,

officially there is no example ported for this board. But eRPC doesn't has dependency for board. He has dependency for used OS and transport layer.

For more information you can look on this documentation: https://community.nxp.com/docs/DOC-334083

And here for step-by-step guide how to create erpc application: https://github.com/EmbeddedRPC/erpc/wiki/Getting-Started

Re: eRPC support for LPC546xx

soledad — Fri, 03 May 2019 13:47:05 GMT

Hi,

In addition, you can check the following thread

https://community.nxp.com/thread/477242

I hope this helps,

Have a nice day!

Soledad

Re: eRPC support for LPC546xx

gbarcan — Fri, 03 May 2019 21:09:07 GMT

Thank you Dusan, I think we should be able to get it running on the LPC546xx using the uart transport and through the CMSIS UART Driver. We started working on it and we should have hardware available soon to test things.

Re: eRPC support for LPC546xx

gbarcan — Fri, 03 May 2019 21:11:48 GMT

eRPC (embedded remote procedure call) and ECRP (Enhanced Code Read Protection)