Updating firmware using UART for LPC1768

ashokrabadiya — Wed, 24 Apr 2019 11:51:01 GMT

Hello,

I am flashing my code through Flash Magic over UART0, just wanted to know whether I can Flash it over other UART ?

If I understood correctly, the boot ROM is configured to receive data from UART0. How can we configure to receive data from UART3 ?

Thanks in Advance

Re: Updating firmware using UART for LPC1768

jeremyzhou — Thu, 25 Apr 2019 01:40:49 GMT

Hi Ashok Rabadiya,

Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
1) If I understood correctly, the boot ROM is configured to receive data from UART0. How can we configure to receive data from UART3?
-- No, I'm afraid the UART3 is unavailable

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

LPC Microcontrollers中的主题 Updating firmware using UART for LPC1768

Updating firmware using UART for LPC1768

Re: Updating firmware using UART for LPC1768