topic Re: lpcxpress iDE pemicro multilink universal tools config in LPC Microcontrollers

lpcxpress iDE pemicro multilink universal tools config

jongsubkim — Thu, 25 Apr 2019 05:08:51 GMT

lpcexpress IDE not config(SWD) Pemicro multilink universal problem !

Howto configulation help me!

Re: lpcxpress iDE pemicro multilink universal tools config

ZhangJennie — Thu, 25 Apr 2019 07:24:34 GMT

Hi jongsub kim

What's your chip part number? I will check it.

Have a nice day,

Jun Zhang

Re: lpcxpress iDE pemicro multilink universal tools config

converse — Thu, 25 Apr 2019 07:46:51 GMT

I am pretty certain that LPCXresso does not support PEMicro - you need to use MCUXpresso.

Re: lpcxpress iDE pemicro multilink universal tools config

jongsubkim — Thu, 25 Apr 2019 07:49:53 GMT

Im LPC11e36 used

******************************************

OntechOne Co.,LTD.

JongSub KIM

(SambooMTS 202), 22,86Beon-Ahngil ,Sanbon-ro,

Gunpo-si, Gyeonggi-do,KOREA(zip:15847)

경기도 군포시 산본로86번안길 22(당정동) 2층202호(우:15847)

*******************************************

TEL : 02-857-5020

FAX : 02-857-5037

mobile : 010-6381-3981

Home : www.apptools.kr

*******************************************

e-mail : ssjsk12@outlook.com

e-mail : ssjsk12@gmail.com

*******************************************

보낸 사람: ZhangJennie

보낸 날짜: 2019년 4월 25일 목요일 오후 4:25

받는 사람: jongsub kim

제목: Re: - Re: lpcxpress iDE pemicro multilinkuniversal tools config NXP Community

Re: lpcxpress iDE pemicro multilink universal tools config

reply from ZhangJennie in LPC Microcontrollers - View the full discussion

Hi jongsub kim

What's your chip part number? I will check it.

Have a nice day,

Jun Zhang

Reply to this message by replying to this email, or go to the message on NXP Community Start a new discussion in LPC Microcontrollers by email or at NXP Community Following Re: lpcxpress iDE pemicro multilink universal tools config in these streams: Inbox This email was sent by NXP Community because you are a registered user.

You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences

Re: lpcxpress iDE pemicro multilink universal tools config

ZhangJennie — Fri, 26 Apr 2019 02:10:18 GMT

Hi jongsub kim

LPCXpresso IDE can't support UMultilink.

But with below plugin , LPCXpresso will be compatible with P&E products, like the Multilink Universal.

GDB Server plug-in for Eclipse-based ARM IDEs | GDB Server plug-in for Eclipse-based ARM IDEs | PEmicro

Below information was provided by P&E support Mika:
To install the plugin in LPCXpresso, please navigate to Help -> Install New Software, and in the "Work with:" field, enter this URL:

http://www.pemicro.com/eclipse/updates

You can read P&E full instructions on installing the Eclipse Plugin here:

http://www.pemicro.com/blog/index.cfm?post_id=124

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------