LPC MicrocontrollersのトピックRe: How to Program LPC-link2 in CMSIS or J-Link mode

How to Program LPC-link2 in CMSIS or J-Link mode

oscarniño — Thu, 21 Feb 2019 16:56:03 GMT

Hi everybody

I'm working with LPC microcontrollers and using LPC-Link2 board to work with, I would like to share a tutorial about how to change LPC-Link2 board between CMSIS and J-Link mode, I hope this could be helpful for someone.

Best regards

Israel Niño

Re: How to Program LPC-link2 in CMSIS or J-Link mode

kerryzhou — Fri, 22 Feb 2019 06:16:50 GMT

Hi Oscar Nino,

Thanks a lot for your contribution, and welcome to share your experience.

Next time, if you want to share the experience, you can create the document, instead of the question type post.

Have a great day,
Kerry

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: How to Program LPC-link2 in CMSIS or J-Link mode

oscarniño — Fri, 22 Feb 2019 07:00:31 GMT

Hi Kerry

I tried but I couldn't because y don't have permission

Best regards

Re: How to Program LPC-link2 in CMSIS or J-Link mode

jhd — Wed, 08 May 2019 19:43:18 GMT

Thanks for share this.

I'm using so but I received only dots in the screen and never for. (ubuntu bionic beaver)

Re: How to Program LPC-link2 in CMSIS or J-Link mode

kerryzhou — Thu, 09 May 2019 01:47:02 GMT

Hi Javier,

If you have the questions, I highly recommend you to create your own question post, then our LPC engineer will help you in your own question post directly.

Best Regards,

Kerry

Re: How to Program LPC-link2 in CMSIS or J-Link mode

oscarniño — Thu, 09 May 2019 22:22:55 GMT

Sorry I haven't seen this error. I use windows 10.

Best Regards