LPC Microcontrollersのトピック lpcxpresso lpc1853 bin file is too large

lpcxpresso lpc1853 bin file is too large

742791535 — Mon, 07 Jan 2019 08:46:49 GMT

1.after build the project,i get hex and bin files.the hex file is ok ,but the size of bin file is up to 16M.

2. i use lpcxpresso 8.2.2 ide, and lpc1853 mcu.

3. my config is below,could you tell me how to config my projgect? thanks ,i will be waitting.

Re: lpcxpresso lpc1853 bin file is too large

converse — Mon, 07 Jan 2019 13:01:09 GMT

See this (old) forum question:

https://community.nxp.com/thread/420872

Re: lpcxpresso lpc1853 bin file is too large

742791535 — Mon, 07 Jan 2019 15:11:03 GMT

the link dosent give me a way to solve the problem.my question is that the bin file make by xpresso is too large up to 16MB，it's not the correct size.

Re: lpcxpresso lpc1853 bin file is too large

converse — Mon, 07 Jan 2019 18:05:46 GMT

That’s the point. You can’t solve it (with a single bin file).

If you need bin files, you will need to creat two (or more) bin files - one for each non-contiguous memry region.